Spiral micrometer (micrometer) training
We focus on high-end pogo pin connectors, are committed to our own continuous breakthroughs and new technology exploration, and actively carry out regular training. The technician team has very in-depth research and experience on pogo pin. The product range and specifications are industry standards, which can meet customers' high-precision quality requirements.
Spiral micrometer (micrometer) training
Welcome to the custom era. Years of accumulation in the connector field have laid the foundation for the custom era. The company's advanced customization model is used to develop and manufacture new products. At present, we have more than 20 excellent engineering designers who provide customers with a complete set of connector product solutions in our project development center. Involved areas include the Internet of Things, Internet of Vehicles, communications equipment, industrial machinery, medical, household appliances, consumer electronics, instruments, and military supplies markets.
Spiral micrometer (micrometer) training
Spiral micrometer, also known as micrometer, spiral micrometer, sub-centimeter, is a more precise tool for measuring length than vernier calipers. The length can be measured accurately to 0.01mm with a measuring range of several centimeters. A part of it is processed into a thread with a pitch of 0.5mm. When it rotates in the screw sleeve of the fixed sleeve B, it will advance or retreat. The movable sleeve C and the screw are connected into one body, and its periphery is equally divided into 50 divisions. The number of complete turns of the screw is measured by the engraved lines on the fixed sleeve with an interval of 0.5mm, and the part less than one turn is measured by the engraved lines around the movable sleeve. The final measurement result needs to be estimated to one decimal place.
Spiral micrometer (micrometer) training
When measuring, when the measuring anvil and the micrometer screw are close together, if the zero point of the movable scale coincides with the zero point of the fixed scale, screw out the micrometer screw, and make the surface of the measuring anvil and the micrometer screw just touch the two sides of the length to be measured. Note that you cannot use force to rotate or the measurement will be inaccurate. When you touch the measuring surface, slowly rotate the ratchet knobs on the left and right sides until you hear a clicking sound. Then the distance that the micrometer screw moves to the right is the measured length. The whole millimeter of this distance is read on the fixed scale, and the decimal part is read on the movable scale.
Spiral micrometer (micrometer) training
Spiral micrometer, also known as micrometer, spiral micrometer, sub-centimeter, is a more precise tool for measuring length than vernier calipers. The length can be measured accurately to 0.01mm with a measuring range of several centimeters. A part of it is processed into a thread with a pitch of 0.5mm. When it rotates in the screw sleeve of the fixed sleeve B, it will advance or retreat. The movable sleeve C and the screw are connected into one body, and its periphery is equally divided into 50 divisions. The number of complete turns of the screw is measured by the engraved lines on the fixed sleeve with an interval of 0.5mm, and the part less than one turn is measured by the engraved lines around the movable sleeve. The final measurement result needs to be estimated to one decimal place.
