Pogo Pin Right Angle Connector

Pogo Pin Right Angle Connector

Quality control during stamping:

　　Similar to other product manufacturing, manufacturers generally start with stamping during the connector manufacturing process. Through the force of some large-scale high-speed punching machines, the connector can be formed into a punched shape from the original thin metal. 

When pogo pin connector manufacturers produce, one end of the large coil of metal tape will be sent to the front end of the punching machine, and then the other end will be passed through the punching machine hydraulically and wound into the reel. The reel pulls out the metal strip and rolls it up. The finished product is stamped out. In this process, it can be ensured that the product will not have any quality problems, and it will also reduce the occurrence of scratches and curling.

After the pogo pin connector is stamped, it will generally be electroplated immediately. Strict treatment will be applied to it during the electroplating process. Ensure that the pins will not be bent, broken, or deformed so that the pins can be better sent to the electroplating equipment. In addition to ensuring normal and balanced plating, the pogo pin connector manufacturer also needs to be based on actual conditions. 

After the production and processing, the quality and performance of the Pogo Pin Right Angle Connector will be tested. After the test results, the connectors can be adjusted and controlled immediately to meet the corresponding requirements.

Every processing procedure of the pogo pin connector is very important. As a precision accessory, the pogo pin connector cannot avoid hidden dangers during the processing. Therefore, it is necessary to control the production quality of the pogo pin connector.

Hot Tags: pogo pin right angle connector, China, suppliers, manufacturers, factory, customized, wholesale, buy, bulk, in stock, free sample