How to Use Pogo Pin Connector
In addition to being widely used in the installation of home appliances in life, Pogopin connectors are also used in military systems such as aerospace, defense, and other military systems. It is also a component frequently contacted by electronic engineers. As for its function, it is mainly used to block the circuit. Or between isolated and unconnected circuits, a bridge of communication is built to allow current to flow and the circuit to achieve a predetermined function. Pogo pin connectors are indispensable components in electronic equipment. Observing along the path of current flow, you will always find There are one or more Pogopin connectors.
The role of the Pogo pin connector cannot be ignored. First, it helps to improve the production process. Its appearance simplifies the assembly process of electronic products and simplifies the mass production process. Secondly, it is easier to repair, if an electronic component fails, When the Pogo pin connector is installed, the failed components can be quickly replaced; at the same time, the Pogo pin connector is easy to upgrade. Finally, the use of the Pogo pin connector can increase the diversity and flexibility of the design.
In life, you cannot do without electricity, and you cannot do without the Pogo pin connector. Pogo pin connectors are also called plug-ins, sockets, and plugs in China, and are generally referred to as electrical Pogopin connectors, which are devices that connect two active devices. To transmit current or signal.
PogoPin use precautions
1. The amount of compression is generally 2/3 of the total stroke; too little press-in and insufficient positive force will result in unstable impedance; too much press-in will damage the nozzle and cause the pin stuck. In the assembly process, also pay attention to avoid bumping the nozzle, which may cause the pin stuck.
2, contact direction
The contact direction when applying PogoPin
3. The battery contacts or FPC golden fingers paired with PogoPin must not be dirty or oxidized.
A: There must be no remaining plugging fluid
PogoPin paired contact surface must not be dirty, etc.
B: No other dirt remains
PogoPin is assembled and used to avoid touching the plastic partition
4. The PogoPin head and nozzle should avoid touching the plastic partition during assembly and use.
PogoPin is assembled and used to avoid touching the plastic partition
PogoPin pogo pin seems to be a simple part, but if there is no good quality control and perfect manufacturing process level, it is very prone to power failure and pin stuck, or the durability (lifetime) is too short. The process is extremely delicate and complicated, and every process from lathe processing, electroplating, and assembly may bring serious hidden dangers.