The Manufacturing process of pogo pin connector
The production process of the pogo pin connector, the pogo pin connector (English name: pogo pin connector), is a kind of connector widely used in electronic equipment. It looks very simple in structure, but do you know its production process? Don't look at it small, in fact, it is very troublesome to process. Let's briefly talk about the production process of the spring thimble connector:
1. The first is to select raw materials; the needle and needle tube of the spring thimble are all brass, and different brass grades can be selected according to customer needs; the material of the spring is mainly stainless steel.
2. After the material is selected, the next step is to process the copper rods into pogo pins through a precision lathe: needles, needles. Ensure that the surface of the needle and needle tube is free of scratches and knife marks, and is smooth and flat. The spring of the pogo pin is generally purchased directly from the spring factory.
3. After the needle head and needle tube of the spring thimble are processed by the lathe after the quality inspection has no knife scratches, the product is electroplated according to the needs of the customer, and we will also advise the customer on the thickness of the metal according to the application Floor.
4. After the pogo pin connector is electroplated, there is no problem with the manufacturer's inspection. The next step is to assemble the finished product of the pogo pin connector. After the finished product is assembled, the final product is tested, including dynamic impedance, spring strength, and so on.
5. After all inspections are correct, the finished product of the qualified spring thimble connector can be packaged and shipped.
