How to fix the connector pins？
There are many pins on the connector. The pins of the connector are mainly used to communicate with related devices. Therefore, the pins of the connector are very important. In order to ensure the stability and stability of the pins, which methods should be used?
1. Connector pin press-in type: Forced press-in method to fix the pins.
The pin installation is simple, the insulated wire does not need to be stripped, which can ensure a good electrical connection without damaging the wire. There is no need to return the cable, which can save the investment in the cable. There is no need to cut off the main cable, and it can be used as a branch point at any position of the cable. The cost is low, and the installation space requirements are small. The connector is completely insulated, and the cable branch can be made without stripping the insulation of the cable.
2. Connector pin epoxy type: After perforating the insulator and shell, use epoxy resin to fix the pin.
This will enhance chemical resistance, acid resistance, alkali resistance, and organic solvent resistance. In addition, the molding shrinkage rate is low, the size is stable, and the cracking probability is low. Its mechanical properties and heat resistance are also excellent, and the bonding strength is high. It is very suitable for use in molded products with embedded parts, coils, and electronic devices. It has excellent electrical properties and can be used as high-frequency and high-voltage insulation material. Its arc resistance and surface leakage resistance are better than ordinary insulation materials.
3. Connector pinpoints riveting type: After pressing in, point riveting the shell to fix the pin.
This kind of structure is simple, the reliability is also high, it is a cost-effective permanent fixed assembly method. The assembled metal components are firm, compact, and stable, with high impact resistance, corrosion resistance, earthquake resistance, and strong weather resistance. And there is no vibration, pollution, and noise during processing, which is environmentally friendly, energy-saving, fast, efficient, high-quality, and beautiful. It can also be riveted and fixed at multiple points without adding any adhesives, solvents, fillers, and fasteners, low energy consumption, compact equipment, and a small footprint.