High current charging connector cable 15A-30A
Structural technical requirements:
1. Connectors include male, female, and male sockets. The connector type is 2P, and the reference pin spacing is 4.2mm;
2. The external structure of the male head includes 4 screw holes. The size requirements are shown in the figure below. The male lead supports welding 18# AWG silicone wire:
3. The end of the female head is designed to be covered with rubber, and the length of the rear back of the rubberized head does not exceed 5mm.
The female lead supports the welding of 18#AWG silicone wire;
1. Female head 2. Male head 3. Male head seat 4. Anti-reverse insertion structure corresponding to male and female heads, and marked on the plastic shell+
5. The size of the male seat plastic shell is as shown in the figure, and the pin type also supports welding 18#AWG silicone wire;
6. The required range of insertion force: extraction force 1~2kg, insertion force 2~4kg;
Total length≤20mm Electrical technical requirements:
1. Continuous current 12~15A, instantaneous current 25~30A;
2. Use voltage ≤ 250V, withstand voltage ≥ 1500V;
3. Contact resistance ≤ 0.8mΩ, insulation resistance ≥ 500MΩ;
4. The surface of the copper parts is gold-plated 2U, and the service life is more than 1000 times;
5. Support wire gauge up to 18# AWG;
6. Temperature resistance range -25~120℃;
7. Flame retardant grade UL94-VO, RoHS compliant;
Male φ1,4 Copper 6,2 Female Silicone wire Male seat 8,4
