How does a precision lathe stamp pogo pin thimble accessories?
1. Pressing of lathe
The manufacturing process of the pogo pin thimble connector usually starts from stamping. After a large high-speed punching machine, the pogo pin thimble connector is made by punching thin metal strips. One end of the large coiled metal belt is fed into the front end of the punching machine, and the other end is wound into the reeling pulley through the hydraulic worktable of the punching press. The metal belt is pulled out through the reeling pulley and the finished product is rolled out and stamped. In this process, some finished products will have quality problems, such as scratches, curling, etc. For this kind of finished product, it must be eliminated.
2, finished product test
Pogo pin thimble connector manufacturers hope that the inspection system can detect various inconsistent defects on the plating surface of the connector pins, such as very small scratches and pinholes. Although these defects are easy to identify, because most pogo pin thimble connectors have irregular and angled surface designs, it is difficult for the visual inspection system to identify the images required for these subtle defects.
After pogo pin thimble needles and needles, tubes are processed by a lathe, after confirming that there are no knife marks and scratches in quality inspection, the products are electroplated according to the needs of customers.
